Platform Explorer / Nuxeo Platform 2021.25

Contribution org.nuxeo.ecm.platform.picture.commandline.imagemagick--command

This contribution is part of XML component org.nuxeo.ecm.platform.picture.commandline.imagemagick inside nuxeo-platform-imaging-core-2021.25.8.jar /OSGI-INF/commandline-imagemagick-contrib.xml

Extension Point

Extension point command of component CommandLineExecutorComponent.

Registration Order

8
The registration order represents the order in which this contribution was registered on its target extention point. This will impact the override/merge behaviour when it is implemented on the target service, and is useful for proper customization of existing contributions.
You can influence this order by adding "require" tags in the containing component declaration, to make sure it is resolved after another component (see "Resolution Order" on components).

Contributed Items

  • <command enabled="true" name="identify">
          <commandLine>identify</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -ping -format '%m %w %h %z %[colorspace]' #{inputFilePath}[0]</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -ping -format "%m %w %h %z %[colorspace]" #{inputFilePath}[0]</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
  • <command enabled="true" name="crop">
          <commandLine>stream</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -map rgb -storage-type char -extract #{tileWidth}x#{tileHeight}+#{offsetX}+#{offsetY} #{inputFilePath}[0] - | convert -depth 8 -size #{tileWidth}x#{tileHeight} rgb:- #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -map rgb -storage-type char -extract #{tileWidth}x#{tileHeight}+#{offsetX}+#{offsetY} #{inputFilePath}[0] - | convert -depth 8 -size #{tileWidth}x#{tileHeight} rgb:- #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
  • <command enabled="true" name="resizer">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -depth #{targetDepth} #{inputFilePath}[0] jpg:- | convert - -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -depth #{targetDepth} #{inputFilePath}[0] -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
  • <command enabled="true" name="gifResizer">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -depth #{targetDept h} #{inputFilePath}[0] -coalesce -resize #{targetWidth}x#{targetHeight} -deconstruct #{outputFilePath}</parameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
  • <command enabled="true" name="jpegResizer">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -background white -flatten -depth #{targetDepth} #{inputFilePath}[0] jpg:- | convert - -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -background white -flatten -depth #{targetDepth} #{inputFilePath}[0] -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
  • <command enabled="true" name="rotate">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] -rotate #{angle} #{outputFilePath}</parameterString>
          <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] -rotate #{angle} #{outputFilePath}</winParameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
  • <command enabled="true" name="cropAndResize">
          <commandLine>stream</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -map #{mapComponents} -storage-type char -extract #{tileWidth}x#{tileHeight}+#{offsetX}+#{offsetY} #{inputFilePath}[0] - | convert -depth 8 -size #{tileWidth}x#{tileHeight} -resize #{targetWidth}x#{targetHeight}! #{mapComponents}:- #{outputFilePath}</parameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>
  • <command enabled="true" name="multiTiler">
          <commandLine>convert</commandLine>
          <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] -crop #{tileWidth}x#{tileHeight} +repage #{outputFilePath}</parameterString>
          <installationDirective>You need to install ImageMagick.</installationDirective>
        </command>

XML Source

<extension point="command" target="org.nuxeo.ecm.platform.commandline.executor.service.CommandLineExecutorComponent">

    <command enabled="true" name="identify">
      <commandLine>identify</commandLine>
      <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -ping -format '%m %w %h %z %[colorspace]' #{inputFilePath}[0]</parameterString>
      <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -ping -format "%m %w %h %z %[colorspace]" #{inputFilePath}[0]</winParameterString>
      <installationDirective>You need to install ImageMagick.</installationDirective>
    </command>

    <command enabled="true" name="crop">
      <commandLine>stream</commandLine>
      <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -map rgb -storage-type char -extract #{tileWidth}x#{tileHeight}+#{offsetX}+#{offsetY} #{inputFilePath}[0] - | convert -depth 8 -size #{tileWidth}x#{tileHeight} rgb:- #{outputFilePath}</parameterString>
      <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -map rgb -storage-type char -extract #{tileWidth}x#{tileHeight}+#{offsetX}+#{offsetY} #{inputFilePath}[0] - | convert -depth 8 -size #{tileWidth}x#{tileHeight} rgb:- #{outputFilePath}</winParameterString>
      <installationDirective>You need to install ImageMagick.</installationDirective>
    </command>

    <command enabled="true" name="resizer">
      <commandLine>convert</commandLine>
      <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -depth #{targetDepth} #{inputFilePath}[0] jpg:- | convert - -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</parameterString>
      <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -depth #{targetDepth} #{inputFilePath}[0] -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</winParameterString>
      <installationDirective>You need to install ImageMagick.</installationDirective>
    </command>

    <command enabled="true" name="gifResizer">
      <commandLine>convert</commandLine>
      <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -depth #{targetDept h} #{inputFilePath}[0] -coalesce -resize #{targetWidth}x#{targetHeight} -deconstruct #{outputFilePath}</parameterString>
      <installationDirective>You need to install ImageMagick.</installationDirective>
    </command>

    <command enabled="true" name="jpegResizer">
      <commandLine>convert</commandLine>
      <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -background white -flatten -depth #{targetDepth} #{inputFilePath}[0] jpg:- | convert - -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</parameterString>
      <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -background white -flatten -depth #{targetDepth} #{inputFilePath}[0] -resize #{targetWidth}x#{targetHeight} #{outputFilePath}</winParameterString>
      <installationDirective>You need to install ImageMagick.</installationDirective>
    </command>

    <command enabled="true" name="rotate">
      <commandLine>convert</commandLine>
      <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] -rotate #{angle} #{outputFilePath}</parameterString>
      <winParameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] -rotate #{angle} #{outputFilePath}</winParameterString>
      <installationDirective>You need to install ImageMagick.</installationDirective>
    </command>

    <command enabled="true" name="cropAndResize">
      <commandLine>stream</commandLine>
      <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet -map #{mapComponents} -storage-type char -extract #{tileWidth}x#{tileHeight}+#{offsetX}+#{offsetY} #{inputFilePath}[0] - | convert -depth 8 -size #{tileWidth}x#{tileHeight} -resize #{targetWidth}x#{targetHeight}! #{mapComponents}:- #{outputFilePath}</parameterString>
      <installationDirective>You need to install ImageMagick.</installationDirective>
    </command>

    <command enabled="true" name="multiTiler">
      <commandLine>convert</commandLine>
      <parameterString>-define registry:temporary-path=#{nuxeo.tmp.dir} -quiet #{inputFilePath}[0] -crop #{tileWidth}x#{tileHeight} +repage #{outputFilePath}</parameterString>
      <installationDirective>You need to install ImageMagick.</installationDirective>
    </command>

  </extension>